Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
The 1-1/4" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
$72.00 - $75.99
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Rear wheel strap for Boa bike mount. Includes one strap.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty
Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in
We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty
Page 1 of 6 Next page